Posted on: June 21, 2022 Posted by: Santosh Kumar Comments: 0

You must be eager to know about the role of double sided tapes. It is a tape that has sensitive adhesives on both the sides and parts. You can use both the sides and parts. It is attached to a carrier that holds the tape strongly at all ends. It is found that the double sided tape is much better and more advanced in many ways. You can use it for binding purposes. Most commercial places prefer to use this tape. They are much wider. This is why you can use it for binding and other purposes. It will help you carry out the work in a hassle-free manner.

The double sided tapes have strong adhesives on both sides. You can use it equally everywhere. Most people are of the opinion that they can use these adhesives to carry out any industrial work. They are very convenient for such works. If you have already used one part of the tape, you can attach the paper and use the other part. This is one of the advantages of using tape. The demand for these tapes is gradually increasing in the industrial sectors and industries.

Double Sided Tape

List of Best Double Sided Tape in India

How to choose the best double Sided Tape in India?

Keep reading to know what factors you need to consider while choosing the double-sided tape in India.

  • Type of Tapes

Double-sided tape is divided into two types – Thick Tapes and Thin Tapes:

  1. Thick Tapes

This tape is significantly heavier than other models, as the name suggests. It is differentiated in sturdiness because thicker material, specifically acrylic can generally support more weight and are more rigid. In general, thick double-sided tape is more likely to work in outdoor conditions and tolerate the elements better. For instance, this tape type is usually easy to tear and use like duct tape.

  1. Thin Tapes

A thinner tape is probably used for lighter and smaller objects with adhesive. Since it is thinner, the tape becomes more elastic and malleable. But, it can’t sustain as much weight per square inch, plus they are easier to maintain. They are less likely to leave residue behind and more easily removed.

  • Tape Material

The tape material is based on the surface the adherent rests on. The tape should not fold again on its own and should be malleable. The thickness and elasticity vary with a preferred material being acrylic. Thicker tape tends to be difficult to use and is most durable than thinner tape. In opposition, thinner tapes won’t last over the long term, but they are easier to manage.

  • Ability to Hold

The next thing that needs to consider is whether or not the tape hold the weight, or how much weight the tape can support. You need a tape measure in square inches; this measurement gives you a clear idea of ​​how much tape you will need to use to mount the objects. Depending on the material used, the type of adherent, and your mounting tape, you may want to test the adhesive ability of the tape. You can see one as low as 70 squares per inch and as tall as 33 inches per square inch of support.

  • Other Considerations

Some other aspects also have a great impact on the usage of double-sided tape. These include temperatures. You need to check how flexible the glue and tape are at the temperature. Be sure the tape is rated to be effective in outdoor spaces and check near what temperatures it is rated to work. There are some tapes available that are weak against heat while vulnerable to cold.

How to use double-sided tape properly?

When it comes to mounting and fastening, the double-sided tape is taking the place of surface glue in all types of construction and building works. Because it doesn’t create a mess, holds to perfection, applies fast, and is easy to remove. If you’re unfamiliar with how to use double-sided, read the following steps.

  • Clean the surface where the double sided tape needs to be applied

A simple rule for a good tape adhesive is cleaning the surface. Take a few drops of alcohol on a clean cloth to clean the surface. Make sure it is cleaned any bits of dirt, and let it air dry.

  • Add abrasion to the surface

Adding abrasion to the surface means you are enhancing the base area for a further bond. This works great for plastic and painted surfaces. Use a quality hand pad to achieve an adequate amount of abrasion. Note:  Instead of linear motion, use a circular motion to enhance the number of micro-scratches. And, not all tapes require micro-abrasion. Some double-sided tapes are perfect glossy surfaces.

  • Surface’s Texture

Double-sided tape is worst to apply on surfaces that are fibered, porous, or rough. If you want to use this tape on these surfaces, you must seal them. This will help enhance adhesive strength and unit the surface.

  • Ensure the surface’s nature

The hydrophilic surface is water-friendly and shares an adhesive bond in high humidity environments. Water vapour reduces the adhesion strength and tape bond.  Some surfaces are vulnerable to oxidation which will lessen the tape bond.

  • Priming

To enhance the adhesiveness of double-sided tape, one must follow this step. Priming surface means you are additionally creating a new layer to encourage strong adhesion.

  • Applying the double-sided tape

If the tape is applied to a surface with more adhesive, it will last longer on it. To increase this bond to surface ratio, you will need to apply a sufficient amount of pressure. In this way, the bond strength between the tape and the surface will be improved.

  • Let it stick

Once the tape is in place, allow it to form a strong bond with the surface. The strength increases as the adhesive flow to the surface. You will need to be patient until the tape sticks to the surface; otherwise, it will peel off quickly. Alternatively, you can enhance the room temperature to achieve faster results or 50% of the maximum adhesive strength.